Shubhada Enterprises

• Type-4IEC
• Standard: IEC 61496-1-2
• Supply: 12 - 24 Volts DC
• Covered Range:
• LC: 300 mm - 3/5/10/15/20 mtr,
• LX: 500 mm - 3/5/10/15/20 mtr
• Output: PNP / NPN / NO / NCLED
• Indication and By-Pass for each beamPitch (Pitch50): 3/5/10/15/20 mtr
• LC MODELS - Parallel BeamNo of Beams: 6 nosActive Beams: 6 nosMin. Range: 300 mm
• LX MODELS - Cross BeamNo of Beams: 6 nosActive Beams: 16 nosMin. Range: 500 mm

This sensor is a type of safety light curtain designed for sensing and detecting the height of an object during a process. It utilizes parallel beams and provides a BCD (Binary-Coded Decimal) output to indicate the exact number of beams that are blocked by the object.

Key Features

 

• Output: BCD output to report the status of each beam.

• Indication: LED indication for output status and for each individual beam.

• Housing: Available in Aluminum Housing with a Powder-coated finish.

• Alignment: Non-critical alignment between the sensors.

• Variants: Multiple Protected Heights are available.

• Beam Bypass: Provided in hand/body protection models.

Applications

 

• For Sensing which beams are Blocked or Open by an object.

• Height detection of objects.

• Suitable for Painting Booths to control spray guns in front of the object.

• Suitable for GO-NO-GO systems depending on size or heights.

• Used in special purpose machines and systems.

• Also used for Protection from Robots and Very High Voltage systems.

Supply: 12-24 Volts DC, Covered Range : 150 - 3000mm LED Indication for Output, Output: PNPINPN - NO / NC


*Specifications*
- *Series / Type*: FX Series / Cross Beams Type / Two Outputs in Parallel- *Power Supply*: 12 – 24 Volts DC / Reverse Polarity Protected- *Output*: PNP or NPN- *Output Indications*: Through LEDs- *Channel Indication*: LED indication for each channel- *Response Time*: On to Off: 10 – 15 m sec. Off to On: 50 – 100 m sec- *No of beams*: 28, 46, 70, 94, 118, 142, 166, 190, 213- *Beam By Pass*: Provided in hand/body protection models- *Protected Heights*: 90 – 2000 mm- *Pitch offered*: 11 mm- *Adjustable Range*: 150 mm – 3000 mm- *Standard Cable length*: 5 meters for emitter, 3 meters for receiver- *Operating Temperature*: Up to 55 Degrees centigrade- *Cross Section*: 36 x 42 mm- *Electrical Connections*: Plug in Connector for Emitter & Receiver- *Applicable to*: Directly work with PLCs / Controllers- *Protections*: Output short circuit protected- *Vibration Resistance*: Amplitude: 0.75 mm (p) Freq: 10 – 55 Hzs, Rate: 1 Octave / min- *Operating ambient Light*: 500 Lux (max.) when source is placed opposite to receiver, > 3000 lux when source placed at an angle of 20 degrees- *Suitable for*: Machines with quick emergency stop

^{Safety Light Curtain - BODY PROTECTION AREA SENSOR from Shubhada Enterprises is used for creating an invisible safety barrier that instantly stops system movement, preventing major body injuries and providing full perimeter access control.}

Series: LC/LX/DA Supply: 12 -24 Volts DC, Covered Range : 500 - 3000 mm, LED indication and Beam By-Pass for each channel, 1OP / 2OP Output Output :PNP/NPN-NO/NC

Applications -

For Body Protection from Dangerous machines or systemsSuitable for Big Pneumatic or Hydraulic Power PressesAs Safety Barriers for various machines / perimeter controlUsed in Injection Molding Machines for Sliding DoorAlso used in Tyre molding, forging presses, conveyor belts / Area safetyAlso used for Protection from Robots, Very High Voltage systems

Supply : 12 -24 Volts DC, Covered Range: 3 /10 / 15 / 20 / 30 / 40 mtr LED indication for each channel, Output: PNP / NPN - NO / NC

Supply : 12 - 24 V DC
Covered Range : Up to 500 mm
PNP NC OutputLED indication for Output

Sleek safety light curtains are specialized devices used in industrial and commercial settings to safeguard personnel from hazards associated with machinery and automated processes.
Shubhada Enterprises offer sleek safety light curtains for hand safety application.

HAND Protection : Models with 2 Outputs

Supply : 12 - 24 Volts DC, Covered Range : 300 - 3000 mm,Dual PNP NC Output, LED Indication for each channel, By-Pass facility for each beam,Cross Section : 27.5 x 26 mm, Easy Mounting, Control Unit isRated Output @ 230V AC power supply.

Diffuse Area Sensor for Ganty Cranes

Infrared Diffuse Area Sensor (Multi-beam)
Senses persons or objects in a specific sensing area using diffuse reflection.
A separate controller unit is available (works on 230V AC).
Supply : 12 -24 Volts DC
Covered Range : Up to 2000 mm PNP NO / PNP NC
Output : LED indication for output
Operating Temp : Up to 55°C


Applications

 

• Crane Safety: Anti-collision and object detection for Gantry Cranes.

• Mobile Robots: Safety for Battery Operated Vehicles (AGVs/AMRs).

• Machine Guarding: Safety barriers for various industrial machines.

• Access Control: Safety barrier for sliding gates or boom barriers.

• Paper Industry: Safety applications in Paper Cutting Machines.

• Level Sensing: Level detection in hoppers.

Supply : 12 - 24 V DC
Covered Range : Upto to 500 mm
Output : PNP / NPN - NO / NC
LED indication for output